Your cart is currently empty!
Month: January 2025
-
Cannabis Cultivation: Protecting People from Pesticide Exposure
Cannabis cultivation is a booming industry, but it comes with unique occupational safety challenges. Among these, pesticide exposure poses significant health risks to workers. Proper safety protocols, personal protective equipment (PPE), and adherence to regulatory standards are essential for protecting the workforce. So, how can cannabis cultivation businesses ensure worker safety while maintaining compliance?
Pesticides are vital for managing pests in cannabis cultivation, but improper handling can jeopardize worker health and safety. What measures can employers take to minimize risks and ensure a safe working environment?
Implementing proper personal protective equipment (PPE), safe pesticide handling practices, and strict adherence to safety regulations are crucial for reducing pesticide exposure and protecting the health of workers in cannabis cultivation.
This guide outlines the risks of pesticide exposure in cannabis cultivation and provides actionable strategies to create a safer workplace.
The Risks of Pesticide Exposure in Cannabis Cultivation
Health Hazards
Pesticide exposure can lead to both short-term and long-term health effects. Workers may experience skin irritation, respiratory issues, nausea, and headaches after exposure. Prolonged exposure can result in chronic illnesses such as neurological disorders, reproductive issues, or even cancer (Seltenrich, 2019).
Workplace Risks
Handling concentrated pesticides, especially during mixing or application, is a primary risk. Workers can inhale airborne particles or come into contact with residues on plants and surfaces. The enclosed nature of greenhouses exacerbates these risks by increasing pesticide concentrations (Taylor & Birkett, 2019).
Industry-Specific Challenges
Cannabis cultivation presents unique challenges, including high humidity and poor ventilation that amplify pesticide hazards, along with frequent applications due to rapid plant growth cycles.
Mitigating Risks in Cannabis Cultivation with Proper PPE
Essential PPE for Workers
Workers should be equipped with essential PPE, including chemical-resistant gloves, NIOSH-approved respirators, long-sleeved shirts, pants, coveralls, goggles, and waterproof boots.
Best Practices for PPE Use
Best practices include ensuring PPE fits correctly, inspecting gear for damage before each use, and cleaning and storing reusable PPE properly.
Safe Handling Practices for Pesticides in Cannabis Cultivation
Training and Education
Employers must train workers on proper handling, application, and storage of pesticides, as well as the specific risks associated with pesticides used in cannabis cultivation (Cuypers et al., 2017).
Application and Storage
Mixing pesticides in well-ventilated areas, using calibrated equipment, and avoiding spraying during windy conditions are critical practices. Post-application safety measures include allowing sufficient time for pesticides to settle, following re-entry intervals specified on labels, and washing exposed skin immediately.
Workplace Controls to Minimize Exposure
Ventilation and Storage
Greenhouses should be equipped with exhaust fans and air filtration systems to reduce airborne pesticide concentrations. Pesticides should be stored in locked, labeled cabinets away from other materials, and an inventory must be maintained to ensure all containers are sealed and labeled properly.
Spill Response Plans
Developing and implementing a spill response protocol, providing spill kits, and training workers to handle spills safely are also essential workplace controls.
Ensuring Compliance with Safety Standards
Regulatory Requirements
Compliance with OSHA’s standards for agricultural worker protection (29 CFR 1928) and EPA Worker Protection Standard (WPS) guidelines is critical. Employers must stay informed of and comply with local rules, as regulations for pesticide use in cannabis cultivation vary by state (Seltenrich, 2019).
Case Study: A Proactive Approach
A greenhouse facility in California successfully reduced pesticide exposure incidents by 80% within a year by implementing stricter PPE requirements, training programs, and upgraded ventilation systems. This proactive approach not only improved worker safety but also boosted operational efficiency (Seltenrich, 2019).
The Benefits of Pesticide Safety Measures
Reducing pesticide exposure leads to fewer health issues, increased morale, and higher productivity among workers. Adhering to safety standards prevents fines and legal complications, while proper pesticide use ensures cleaner, safer cannabis products for consumers, enhancing brand reputation.
Conclusion: A Safety-First Culture
Protecting workers from pesticide exposure in cannabis cultivation requires a comprehensive strategy involving proper PPE, safe handling practices, and adherence to regulatory standards. By fostering a safety-first culture, employers can safeguard their workforce and ensure sustainable operations in this rapidly growing industry.
References
Cuypers, E., Vanhove, W., Gotink, J., Bonneure, A., Van Damme, P., & Tytgat, J. (2017). The use of pesticides in Belgian illicit indoor cannabis plantations. Forensic Science International, 277, 59-65. https://doi.org/10.1016/j.forsciint.2017.05.016
Environmental Protection Agency (EPA). (n.d.). Worker Protection Standard (WPS). Retrieved from https://www.epa.gov
Seltenrich, N. (2019). Into the weeds: Regulating pesticides in cannabis. Environmental Health Perspectives, 127(4), A72-A79. https://doi.org/10.1289/EHP5265
Taylor, A., & Birkett, J. W. (2019). Pesticides in cannabis: A review of analytical and toxicological considerations. Drug Testing and Analysis, 12(2), 180-190.
-
What Are Compliance Platform Management?
Compliance is an essential aspect of modern business operations, especially as industries face ever-increasing safety, regulatory, and legal demands. Without the right tools, managing these requirements can be complex and time-consuming. Compliance platform management offers a solution to streamline these processes, improving efficiency and reducing risks. What exactly is compliance platform management, and how can it support your business objectives?
Managing safety and regulatory requirements is a challenging task for many organizations. Without a structured system, ensuring compliance can lead to inefficiencies, missed deadlines, and potential penalties. So, what is compliance platform management, and how can it help businesses overcome these challenges?
Compliance platform management leverages centralized, automated systems to manage safety, regulatory, and legal tasks effectively. By utilizing these platforms, businesses can enhance efficiency, ensure adherence to requirements, and minimize risks.
This article explores the significance of compliance platform management, its core functions, benefits, and why every business needs it to navigate today’s complex compliance landscape.
The Essentials of Compliance Platform Management
What Is Compliance Platform Management?
Compliance platform management refers to the use of technology-driven systems that centralize and automate the handling of compliance-related activities. These activities include safety protocol enforcement, regulatory adherence, audit management, and documentation. By consolidating data and automating workflows, compliance platforms reduce manual effort and ensure accuracy.
Core Functions of Compliance Platform Management
- Centralized Data Management: These platforms organize all compliance-related information in a single secure location, making updates and access seamless.
- Automated Workflows: Tasks such as inspections, reporting, and training are streamlined, reducing administrative burdens.
- Real-Time Monitoring: Compliance status and deadlines are continuously tracked, with alerts provided to avoid violations.
Why Your Business Needs Compliance Platform Management
Simplifying Complex Processes
Modern businesses often deal with numerous regulations spanning federal, state, and industry-specific standards. Compliance platforms integrate these requirements into a unified system, minimizing confusion and administrative overload.
Reducing Non-Compliance Risks
Failing to meet compliance standards can result in costly fines, lawsuits, and reputational damage. Automated tracking and reminders offered by compliance platforms ensure timely adherence to regulations.
Saving Time and Resources
By automating tasks such as inspection tracking and report generation, businesses can allocate their resources to strategic initiatives instead of repetitive administrative work.
Enhancing Accountability
Compliance platforms document actions, assign responsibilities, and track progress, ensuring transparency and accountability in compliance-related activities.
Supporting Safety Programs
Integrated with safety management systems, compliance platforms track incident reports, certifications, and risk assessments, fostering a culture of safety within the organization.
Features of an Effective Compliance Platform Management
Document Management
An effective platform provides centralized storage for policies, certifications, and records, ensuring that only the most up-to-date documents are available for use.
Workflow Automation
Automating recurring tasks like training reminders or audit scheduling reduces manual intervention and increases efficiency.
Risk Assessment Tools
Built-in risk assessment features allow businesses to identify and prioritize risks, enabling proactive mitigation strategies.
Compliance platforms keep businesses updated with the latest regulatory changes, ensuring continuous compliance.
Real-Time Dashboards
Customizable dashboards offer real-time insights into compliance metrics, deadlines, and performance indicators.
Integration Capabilities
Seamless integration with HR, ERP, and safety management systems allows for comprehensive compliance oversight.
Real-World Example: Manufacturing Success
A manufacturing company implemented a compliance platform to manage OSHA requirements, training certifications, and equipment inspections. Within a year, the company reduced manual tracking efforts by 40% and improved compliance rates, avoiding regulatory penalties for three consecutive years. This success illustrates how compliance platforms streamline operations and mitigate risks.
Implementation Steps for Compliance Platform Management
- Identify Compliance Needs: Assess current regulatory requirements and existing compliance challenges.
- Select the Right Platform: Choose a platform that aligns with your industry’s specific needs and integrates seamlessly with existing systems.
- Train Employees: Provide comprehensive training to ensure employees can utilize the platform effectively.
- Monitor and Adjust: Regularly review platform performance to address gaps and adapt to changing requirements.
The Role of Compliance Platform Management in Roof Safety
Compliance platform management is particularly valuable in high-risk industries like construction. Roof work, for example, demands strict adherence to safety protocols and timely equipment inspections to prevent accidents. By leveraging compliance platforms, businesses can ensure that all safety measures are in place, employee certifications are up to date, and incidents are thoroughly tracked and mitigated.
Conclusion
Compliance platform management is not just a tool but a necessity for businesses navigating complex safety and regulatory landscapes. By centralizing processes, automating tasks, and providing actionable insights, these platforms reduce risks, enhance operational efficiency, and promote a culture of safety and accountability. Investing in the right compliance platform today ensures sustainable growth and a competitive edge in the future.
-
Introduction to Battery Safety in Construction: Why It Matters
Batteries power a wide range of construction tools and equipment, offering efficiency and convenience. However, improper handling, storage, or use of batteries can lead to fires, chemical leaks, or injuries. Why is battery safety in construction crucial, and how can workers and contractors implement protocols to mitigate risks?
Batteries are indispensable in modern construction, powering essential tools like drills, saws, and heavy machinery. However, the widespread use of batteries, particularly lithium-ion types, introduces risks such as fires, explosions, and chemical leaks. These dangers underscore the importance of stringent safety measures.
Understanding and following battery safety protocols are essential for preventing fires, chemical leaks, and injuries in construction. By addressing proper handling, storage, and use, construction teams can ensure safe and efficient operations.
This article explores the risks associated with battery use in construction and highlights best practices to maintain safety on job sites.
The Risks of Battery Use in Construction
Batteries, especially lithium-ion, are increasingly favored in construction for their high energy density and portability. However, their use also brings challenges. Lithium-ion batteries are particularly prone to thermal runaway, a phenomenon where heat generated within the battery leads to a chain reaction, potentially resulting in fire or explosion (McDowall, 2021). Improper charging practices, physical damage, or exposure to extreme temperatures can trigger these events, posing severe risks to workers and equipment.
Other common risks include chemical leaks from damaged batteries, which can cause burns or respiratory problems. Electrical shocks are another hazard, especially with high-voltage systems, if batteries are mishandled or maintenance protocols are ignored (Lamb & Jeevarajan, 2021). These incidents can lead to significant operational disruptions, property damage, and even life-threatening injuries.
Best Practices for Battery Safety in Construction
To mitigate these risks, construction teams should adopt comprehensive safety measures tailored to the specific challenges of battery use.
Handling and Storage
Safe handling practices begin with regular inspections. Workers should check batteries for visible damage, such as cracks or leaks, before use. Storage areas must be cool, dry, and well-ventilated to minimize fire hazards. Additionally, batteries should be kept away from flammable materials and stored in an upright position to prevent accidental contact between terminals (Bhatia, 2021).
Charging Protocols
Proper charging is critical to battery safety. Using manufacturer-approved chargers and adhering to specified voltage and current limits reduces the risk of overheating. Charging stations should be located in well-ventilated areas, away from combustible materials. Workers should also avoid overcharging by unplugging batteries once fully charged.
Emergency Preparedness
Preparedness is key to minimizing the impact of battery-related incidents. Construction sites should be equipped with Class D fire extinguishers designed for metal fires, including lithium-ion battery fires. Spill kits with neutralizing agents and personal protective equipment (PPE) should be readily available to manage chemical leaks. Regular drills and training sessions ensure workers are familiar with emergency response protocols.
Addressing Lithium-Ion Battery Safety in Construction
Lithium-ion batteries are commonly used due to their efficiency and portability. However, they present unique safety challenges. Thermal runaway is a primary concern, often triggered by overcharging, physical damage, or exposure to extreme temperatures. To counter this, battery management systems (BMS) are crucial. These systems monitor and regulate battery conditions, preventing overcharging and balancing cell performance (See et al., 2022).
Transporting lithium-ion batteries also requires special precautions. Batteries should be securely packed to prevent movement and physical damage. For disposal, certified recycling programs must be used to mitigate environmental risks and comply with regulatory standards (McDowall, 2021).
Real-World Implications: Case Study
A construction site experienced a near-miss incident when a damaged lithium-ion battery caught fire during charging. Fortunately, the team’s emergency preparedness measures—including a designated charging station and trained personnel—prevented further escalation. Following the incident, the site implemented stricter protocols, such as mandatory battery inspections and enhanced training, resulting in improved safety outcomes over the next year (Todd Jerome Jenkins & Associates, 2025).
The Role of Emerging Technologies
Innovations like the SmartHat device highlight how technology can enhance safety in construction. This battery-free safety device uses passive UHF RFID technology to deliver hazard alerts to workers, eliminating the risks associated with battery-powered systems (Thomas et al., 2023). Such advancements demonstrate the potential for integrating cutting-edge solutions to address traditional safety challenges.
Conclusion
Battery safety in construction is not just a regulatory requirement but a moral obligation. By adopting best practices in handling, storage, and emergency preparedness, contractors can protect their teams and equipment. Embracing emerging technologies and adhering to industry standards will further strengthen safety measures, ensuring a secure and efficient work environment. As the construction industry evolves, so must our commitment to safety.
References
Bhatia, A. (2021). Battery room ventilation and safety. Continuing Education and Development.
Lamb, J., & Jeevarajan, J. A. (2021). New developments in battery safety for large-scale systems. MRS Bulletin, 46, 395-405. https://doi.org/10.1557/s43577-021-00098-0
McDowall, J. (2021). A guide to lithium-ion battery safety. Saft America Inc.
See, K. W., et al. (2022). Critical review and functional safety of a battery management system for large-scale lithium-ion battery pack technologies. International Journal of Coal Science & Technology, 9, 36-48. https://doi.org/10.1007/s40789-022-00494-0
Thomas, S., et al. (2023). SmartHat: A battery-free worker safety device employing passive UHF RFID technology. Duke University.
-
Roof Work Safety: From Fall Detection to Prevention
Roof work safety remains one of the most hazardous activities in construction, with falls consistently ranking as a leading cause of workplace injuries and fatalities. As advancements in technology and safety practices evolve, understanding how to integrate fall detection and prevention systems becomes essential. By aligning occupational safety protocols with cutting-edge research and best practices, companies can significantly reduce risks while fostering a culture of safety.
Roof work is inherently dangerous, with falls being a leading cause of workplace injuries and fatalities. How can roofing companies and contractors protect their teams while ensuring compliance with safety standards?
Implementing proper fall protection for roof work requires a combination of secure anchor points, reliable fall arrest systems, and effective perimeter protection measures. By following these safety tips and best practices, you can minimize risks and safeguard your workforce.
Here’s a comprehensive guide tailored to roofing companies and contractors to enhance safety during roof work.
The Importance of Fall Protection in Roof Worker Safety
Roof work remains one of the most hazardous activities in construction, with falls consistently ranking as a leading cause of workplace injuries and fatalities. These incidents often result from inadequate planning, poor equipment maintenance, or insufficient worker training. Effective fall protection programs not only safeguard workers but also contribute to increased productivity and compliance with regulatory standards (Wilcox, 2020). Prevention Through Design (PtD) principles, for instance, emphasize designing safety into systems and equipment to minimize risks before they occur (Chung et al., 2020).
Innovations in Fall Detection and Prevention
Wearable Systems in Roof Worker Safety
Technological innovations in fall detection and prevention have made significant strides. Wearable systems, such as harnesses equipped with accelerometers and gyroscopes, monitor motion and detect abnormal patterns indicative of a fall (Chaccour et al., 2017). These systems employ inertial sensors like accelerometers and gyroscopes to monitor changes in body orientation and motion. They are particularly effective for personal monitoring, providing immediate alerts and triggering fall arrest mechanisms. Advances in e-textiles further enhance wearability and comfort, integrating safety sensors into clothing without hindering mobility (Chaccour et al., 2017).
Non-Wearable and Hybrid Systems
Non-wearable systems utilize ambient sensors, including motion detectors and pressure sensors, to monitor work environments and identify hazards. Such systems are unobtrusive and provide continuous environmental monitoring. Hybrid models, which combine wearable and non-wearable elements, offer a comprehensive solution by fusing data from various sensors to improve reliability and specificity (Chaccour et al., 2017).
Planning and Training for Fall Prevention in Roof Worker Safety
Effective fall prevention begins with comprehensive planning and training. OSHA emphasizes the importance of hazard assessment, proper use of fall protection equipment, and adherence to safety protocols (Phillips & Stewart, 2018). Hazard assessments involve conducting site-specific evaluations to identify risks such as unprotected edges, skylights, and slippery surfaces. This includes creating tailored fall protection plans that address unique project challenges (Todd Jerome Jenkins & Associates, 2025).
Ensuring that all equipment meets ANSI standards and is regularly inspected is critical. Certification provides assurance that systems are designed to handle anticipated loads and are properly maintained (Wilcox, 2020). Comprehensive training programs should cover the proper use of personal fall arrest systems (PFAS), recognition of hazards, and emergency rescue procedures. Regular drills reinforce preparedness and foster confidence in safety protocols (Phillips & Stewart, 2018). Incorporating PtD strategies during the design phase can eliminate hazards before construction begins. For example, designing roofs with built-in anchor points and parapets reduces reliance on temporary fall protection systems (Chung et al., 2020).
Case Study: U.S. Army Corps of Engineers
The U.S. Army Corps of Engineers (USACE) provides a compelling example of successful fall protection implementation. USACE developed a nationally standardized fall protection guide supplemented by local site-specific adaptations. This approach ensured consistency while addressing unique regional needs. Critical to their success was the establishment of a High Hazard Working Group, which oversaw risk surveys, policy updates, and incident investigations (Phillips & Stewart, 2018).
USACE’s emphasis on rescue procedures further illustrates the importance of preparedness. Their protocols include communication methods, rescue-specific equipment, and training for certified rescuers. These measures ensure that workers are equipped to respond promptly and effectively in emergencies.
Emerging Trends in AI-Driven Prevention
The integration of artificial intelligence (AI) and machine learning into fall detection systems is an emerging trend. AI algorithms analyze sensor data to predict potential falls by detecting gait anomalies or environmental hazards. This proactive approach shifts the focus from detection to prevention, aligning with the broader goal of eliminating risks before incidents occur (Chaccour et al., 2017).
Conclusion: A Call to Action
Fall protection for roof work is not merely a regulatory requirement but a moral imperative. By adopting advanced technologies, adhering to best practices, and fostering a culture of safety, organizations can protect their most valuable asset: their people. As the construction industry evolves, so too must our commitment to innovation and prevention. Together, we can pave the way for safer worksites and a future free from fall-related tragedies.
References
Chaccour, K., Darazi, R., El Hassani, A. H., & Andrès, E. (2017). From fall detection to fall prevention: A generic classification of fall-related systems. IEEE Sensors Journal, 17(3), 812-823.
Chung, H., Lee, H. W., & Gambatese, J. A. (2020). Application of prevention through design (PtD) to improve the safety of solar installations on small buildings. Safety Science, 125, 104633. https://doi.org/10.1016/j.ssci.2020.104633
Phillips, M., & Stewart, E. B. (2018). Using fall protection procedures in the real world. Session No. 770, American Society of Safety Professionals Conference.
Todd Jerome Jenkins & Associates. (2025). Fall protection for roof work: Safety tips and best practices. www.toddjeromejenkins.com/fall-protection-for-roof-work.
Wilcox, K. (2020). Fall protection system certification: Take no chances. Session No. 519, American Society of Safety Professionals Conference.
-
Safety on Construction Sites
Safety on construction sites faces many challenges, including falls, equipment hazards, chemical exposure, and electrical dangers. How can project managers and safety professionals implement effective safety to protect workers and maintain compliance?
Developing and implementing construction site safety requires identifying hazards, establishing clear procedures, training workers, and enforcing compliance. Additionally, following best practices minimizes risks and ensures a safe, efficient work environment.
This guide outlines key steps for creating and maintaining effective safety on construction sites.
Why Safety on Construction Sites Is Critical
Protecting Workers
Construction sites consistently report high injury rates due to hazards such as falls, equipment mishandling, and electrical accidents. According to Andersen and Grytnes (2021), unsafe worker behaviors account for 80–90% of injuries on construction sites. Addressing these risks with effective is essential to safeguarding lives and health.
Regulatory Compliance
Adhering to OSHA’s construction safety standards ensures compliance and avoids penalties. Failure to implement safety measures can result in costly fines, legal repercussions, and project delays (Occupational Safety and Health Administration [OSHA], n.d.).
Operational Efficiency
Safe construction sites experience fewer accidents, reducing downtime and maintaining productivity. Incorporating robust safety fosters operational continuity and financial sustainability (Huang & Yang, 2019).
Key Components of Safety on Construction Sites
Hazard Identification
Conducting regular site assessments is critical for identifying risks such as falling objects, heavy machinery, and chemical exposure. Task-specific risk analyses should inform the development of tailored safety measures (Sanni-Anibire et al., 2019).
Clear Safety Policies
- Standard Operating Procedures (SOPs): Establish detailed guidelines for high-risk activities, such as scaffold use and material handling.
- Emergency Response Plans: Develop actionable plans for scenarios such as fires, medical emergencies, and hazardous material spills (Pieńko et al., 2018).
Personal Protective Equipment (PPE)
Proper PPE, such as helmets, gloves, harnesses, and safety glasses, is essential. Training workers in the correct use, maintenance, and limitations of PPE minimizes injury risks (Lee & Lee, 2023).
Communication Systems
- Daily Safety Meetings: Toolbox talks reinforce hazard awareness and update workers on daily safety priorities.
- Signage and Labels: Effective use of visual cues ensures clear communication of potential risks (Jo et al., 2019).
Developing Effective Safety on Construction Sites
Involve Workers in Planning
Engaging workers and supervisors in safety planning identifies site-specific challenges and fosters ownership of safety measures. Encouraging reporting of near-misses or unsafe conditions helps close protocol gaps (Huang & Yang, 2019).
Customize for Site Conditions
Each construction site’s layout, equipment, and hazards require tailored safety measures. For example, scaffolding must be appropriately designed and inspected to prevent falls (Pieńko et al., 2018).
Integrate Technology
- Use safety management software for tracking compliance, incident reporting, and training records.
- Implement wearable technology for real-time monitoring of worker health and environmental conditions (Lee & Lee, 2023).
Establish Accountability
Assign safety roles, such as safety officers, to oversee protocol implementation. Enforce consequences for non-compliance to ensure adherence.
Training and Education
Comprehensive Training
Workers must be trained in hazard recognition, equipment operation, and emergency response procedures. Onboarding sessions should cover site-specific (Huang & Yang, 2019).
Regular Refresher Courses
Periodic training updates reinforce knowledge and integrate new safety standards. Practical demonstrations enhance understanding and retention (Jo et al., 2019).
Monitoring and Continuous Improvement
Conduct Regular Audits
Frequent site inspections verify compliance and uncover areas for improvement. Effective audits incorporate worker feedback and incident reviews to refine (Sanni-Anibire et al., 2019).
Analyze Incident Reports
Root cause analysis of accidents and near-misses highlights preventive measures and informs policy updates (Andersen & Grytnes, 2021).
Emergency Preparedness
Emergency Plans
Develop site-specific response strategies for fires, medical emergencies, and evacuations. Drills ensure familiarity with procedures and build confidence (Pieńko et al., 2018).
First Aid Readiness
Equip sites with accessible first aid kits and train workers in basic first aid, enhancing immediate response capabilities (Huang & Yang, 2019).
Real-World Example: Safety on Construction Sites
A construction firm implemented daily safety briefings, enhanced PPE standards, and regular site audits, reducing incidents by 50%. Workers reported increased confidence in site safety, enabling the project to stay on schedule with minimal disruptions.
Benefits of Implementing Safety on Construction Sites
- Worker Protection: Reduces risks of injuries and fatalities.
- Regulatory Compliance: Avoids penalties and ensures adherence to legal requirements.
- Cost Savings: Minimizes expenses related to accidents.
- Enhanced Morale: Boosts worker confidence and productivity.
Conclusion
Implementing robust safety is essential for protecting workers and ensuring the success of construction projects. By identifying hazards, establishing clear procedures, and fostering a culture of safety, project managers and safety professionals can create safer, more productive work environments.
References
Andersen, L. P. S., & Grytnes, R. (2021). Different ways of perceiving risk and safety on construction sites and implications for safety cooperation. Construction Management and Economics. https://doi.org/10.1080/01446193.2021.1904516
Huang, Y.-H., & Yang, T.-R. (2019). Exploring on-site safety knowledge transfer in the construction industry. Sustainability, 11(6426). https://doi.org/10.3390/su11226426
Jo, B.-W., Lee, Y.-S., Khan, R. M. A., Kim, J.-H., & Kim, D.-K. (2019). Robust construction safety system for collision accidents prevention on construction sites. Sensors, 19(932). https://doi.org/10.3390/s19040932
Lee, J., & Lee, S. (2023). Construction site safety management: A computer vision and deep learning approach. Sensors, 23(944). https://doi.org/10.3390/s23020944
Pieńko, M., Robak, A., Błazik-Borowa, E., & Szer, J. (2018). Safety conditions analysis of scaffolding on construction sites. International Journal of Civil and Environmental Engineering, 12(2).